Gateway 910 Series System Manual page 66

Open the BIOS Setup utility by restarting the server, then pressing F1 when
the Gateway logo screen appears during startup. The BIOS Setup utility screen
opens. It may not look exactly like the screen shown below.
Main
As you select items on the Main menu or in submenus, you see specific
information related to the current selection in the Item Specific Help box.
The right side of the BIOS Setup utility shows the keystrokes necessary to
access help, navigate through the menus, and perform other functions.
F1 opens the Help screen, providing general help for using the BIOS Setup
utility.
The ↑ ( up arrow) and ↓ (down arrow) keys select items in the menu.
The ← (left arrow) and → (right arrow) keys move you between the
menus.
E either moves you to a submenu screen when a selected item is
NTER
preceded by > or activates a selected field.
E closes the screen you are in and returns you to the previous screen
SC
or exits you from the BIOS Setup utility.
F10 opens a screen that lets you save all settings, then exit the BIOS Setup
utility.
58
Using the BIOS Setup Utility
BIOS Setup Utility
Advanced Chipset
AMI BIOS Version : XX.XX.XX
BIOS Build Date : XX/XX/XX
BIOS ID : XXXXXXXX
Processor Type : Pentium III(tm)
Processor Speed : 800MHz
System Memory : 128 MB
System Time : [XX:XX:XX]
System Date : [Thu XX/XX/XXXX]
Power Boot Security
←→ Select Screen
↑↓ Select Item
-+ Change Field
Tab Select Field
F1 General Help
F10 Save & Exit
ESC Exit
Exit