Gateway 910 Series System Manual page 98

Error message
Print queue is full
Printer is out of paper
Required parameter missing
Syntax error
Time and date not set
Write-protect error
90
Troubleshooting
Solutions
Wait until the current print job has completed
before sending another print job.
If you receive this error often, you need to add
memory to the printer.
Add paper to the printer.
Make sure the printer is online.
Make sure you entered the right command.
If you are trying to exit MS-DOS to return to
Windows, type exit, then press E
Make sure you entered the right command.
If you are trying to exit MS-DOS to return to
Windows, type exit, then press E
Open the BIOS Setup utility, then set the
server date and time.
Move the write-protection tab over the window
on the back of the diskette.
.
NTER
.
NTER