Gateway 910 Series System Manual page 94

The video is distorted
Probable cause
The monitor controls are not
properly adjusted
The connector or cable is
damaged
The surge protector or UPS is
damaged
The monitor is too close to a
source of electrical
interference
The monitor needs to be
degaussed
86
Troubleshooting
Solution
Adjust the monitor controls until the text
becomes clear. See your monitor
documentation for more information.
Make sure the cable and connectors are in
good condition (no bent pins or broken wires).
Disconnect the monitor power cable and
connect it directly to the power source.
Move the monitor away from sources of
electrical interference, such as televisions,
unshielded speakers, microwave ovens,
fluorescent lights, and metal beams or
shelves.
Turn off the server and monitor for at least a
half hour, then turn them back on.