System Problems - Gateway 910 Series System Manual

The printer prints garbled text
Probable cause
The wrong driver is being
used for the selected printer

System problems

The server will not start up
Probable cause
The server is not connected
to an AC outlet
The DIMM is not seated
properly, indicated by a beep
The server is non-responsive
Probable cause
An error occurs during a
program or your server may
be out of memory
82
Troubleshooting
Solution
In the Printers window (Start | Settings |
Printers), select the printer. From the File
menu, select Properties. Make sure the
printer is using the correct printer driver. If not,
install the correct one.
Solution
Make sure the power cable(s) are connected
correctly to an operating AC power source.
Open the server and reseat the loose the
DIMM.
Solution
Restart your server by pressing the Power
button. If the server is still non-responsive,
press and hold in the power button for 10
seconds to turn the server off. Turn the server
back on and follow the on-screen instructions.