Restarting Your Server - Gateway 910 Series System Manual

Restarting your server

If your server does not respond to keyboard or mouse input, you may have
to close programs that are not responding. If closing unresponsive programs
does not restore your server to normal operation, you may have to restart the
server.
To close unresponsive programs and restart Windows 2000 Server:
1
Press C
is not responding.
2
Click
Task Manager
3
Close the program by clicking
4
If the server does not respond, turn off the server power, wait ten seconds,
turn the power on again.
Important
As a part of the regular startup process, a program to check the disk status
runs automatically. When the checks are finished, Windows starts.
Important
+A +D . A window opens that lets you close a program that
TRL LT EL
, then select the program that is not responding.
If the server does not turn off immediately, you may need
to hold the power button down for a few seconds to turn
the server off.
For other operating systems, refer to the appropriate
operating system software manual for instructions.
.
End Task
Restarting your server
13