Gateway 910 Series System Manual page 44

7
Align the drive with an open bay in the lower drive cage. Make sure that
the data and power connectors on the drive face outward, then slide the
drive into the chassis.
8
Push the drive release latch to secure the drive (locked position).
9
Connect the data and power cables to the drive. (See the drive
documentation for the proper cable orientation.)
10
Reinstall the cover panel. (See "Reinstalling the cover panel" on page 22.)
11
Reconnect external devices, the power cord(s), and the modem cable (if
installed), then turn on the server.
12
Run the BIOS Setup utility to make sure that the server recognizes the
drive. (See "About the BIOS Setup utility" on page 57.)
36
Replacing or Adding System Components
Drive
release latch