Memory And Processor Problems; Peripheral/Adapter Problems - Gateway 7450R System Manual

Memory and processor problems

The system detected memory errors during start up
Probable cause
Memory was added or
removed, and the new
configuration was not saved
in the BIOS Setup utility
The memory was installed
incorrectly
A memory chip is faulty
The system does not recognize a new or second processor
Probable cause
The processor was installed
incorrectly

Peripheral/Adapter problems

The system does not recognize a SCSI device
Probable cause
The device needs to be
added as new hardware
The SCSI ID may be
invalid
The SCSI chain is not
terminated
82
Gateway 7450R Server System Manual
Solution
Open the BIOS Setup utility and save the new memory
configuration.
Make sure that the memory is properly seated and
oriented.
Replace the card with the faulty chip. Third-party
diagnostic programs can help determine which chip or
memory segment is failing.
Solution
Check the installation. Make sure that the processor
is fully seated in its socket. The processor should be
recognized automatically if it was installed correctly.
Solution
From the Control Panel window (Start | Settings | Control
Panel), double-click Add New Hardware. Follow the
on-screen instructions for adding the device.
Assign an available SCSI ID to the device.
Make sure the last device on the SCSI chain is terminated.