Turning Off Your Server - Gateway 910 Series System Manual

4
Restart your server. The setup is complete.
Important

Turning off your server

Every time you turn off your server, shut down the operating system first.
You may lose data if you do not follow the proper procedure.
To turn off your server in Windows 2000 Server:
1
Click
Start
2
Click
OK
3
Turn off the monitor and peripheral devices.
Warning
Caution
Important
12
System Setup
For other operating systems, refer to the appropriate
operating system software manual for setup instructions.
, then select
Shut Down,
. The operating system shutdowns and the server turns off.
When you turn the server off, some electric current still
flows through the server. Before opening the server case
or connecting or removing any peripherals, turn off the
server, then unplug the power cord and modem cord (if
installed) or you may get an electric shock.
When you routinely turn off your server (daily or weekly),
do not unplug the server or use the On/Off switch on the
power strip. Regularly cutting off all power to your server
may cause premature battery failure.
For other operating systems, refer to the appropriate
operating system software manual for instructions.
then .
Shut down