This Paper Cannot Be Used As Size Is Not Supported; Roll Printing Is Selected; Roll Printing Is Selected, But Sheets Are Loaded; The Roll Is Empty - Canon iPF8400SE imagePROGRAF User Manual

iPF8400SE

This paper cannot be used as size is not supported.

This paper cannot be used as size is not supported.
Cause
Paper that is too large for the printer has been loa-
ded.
Paper that is too small for the printer has been
loaded.
Paper has been loaded that is too small to print
the test pattern for printhead adjustment or nozzle
checking.

Roll printing is selected.

Roll printing is selected.
Cause
You have attempted to print on a roll, but
no roll is loaded.

Roll printing is selected, but sheets are loaded.

Roll printing is selected, but sheets are loaded.
Cause
A print job for rolls was received when a
sheet is loaded.

The roll is empty.

The roll is empty.
Cause
The roll is empty.
User's Guide
Cause
Lift the Release Lever and load paper of the correct size.
(See "Paper Sizes.")
Lift the Release Lever and load paper of the correct size.
(See "Paper Sizes.")
Lift the Release Lever and load unused paper A4/Letter (vertical) or larger.
More than one sheet may be required depending on the adjustment.
Press ▲ or ▼ to select "Load Roll Paper", and then press the OK button. Load the roll,
and then print.
(See "Loading Rolls on the Roll Holder.")
(See "Loading Rolls in the Printer.")
Press ▲ or ▼ and select Stop Printing or press the Stop button to stop printing.
Follow these steps to load and print on a roll.
1.
Press ▲ or ▼ to select Eject Paper, press the OK button, and remove the sheet.
(See "Removing Sheets.")
2. Load a new roll.
(See "Loading Rolls in the Printer.")
The printer now starts printing the print job.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
Follow these steps to replace the used roll with a new roll of the same type and size.
1.
Lift the Release Lever and remove the roll.
(See "Removing the Roll from the Printer.")
(See "Removing the Roll Holder from Rolls.")
2.
Load the new roll.
(See "Loading Rolls on the Roll Holder.")
(See "Loading Rolls in the Printer.")
This paper cannot be used as size is not supported.
Corrective Action
However, the roll paper may run out during
the print job and you may not be able to print
all of the document.
Press ▲ or ▼ to select Change Paper, and
then press the OK button.
Change the Paper Source of the printer driv-
er, or replace the roll with a roll that has
enough paper for the print job, and then print.
(See "Removing the Roll from the Print-
er.")
P.345
➔
(See "Loading Rolls in the Printer.")
Press ▲ or ▼ and select Stop Printing or
press the Stop button to stop printing.
Corrective Action
P.326
➔
P.326
➔
Corrective Action
P.337
➔
P.339
➔
Corrective Action
P.365
➔
P.339
➔
Corrective Action
P.345
➔
P.347
➔
P.337
➔
P.339
➔
P.339
➔
615