Canon iPF8400SE imagePROGRAF User Manual page 452

Menu Settings
Inter- Ether-
face net
Setup Driver
Interface Print
Return Defaults
System Sleep Timer
Setup
Shut Down Timer
Buzzer
Contrast Adj.
Date &
Time
Date Format
Language
Time Zone
Length Unit
Detect Mismatch
Paper
Size Ba-
sis
Keep Paper Size
452
Setting Item
MAC Address
Date
Time
Sht Selection 1
Sht Selection 2
Description, Instructions
Indicates the MAC address.
Print interface settings information.
Choose OK to restore Interface Setup settings to the de-
fault values.
Specify the period before the printer enters sleep mode.
Sets the time until the printer turns off automatically. If no
operations are performed on the printer for the duration of
the time set in Shut Down Timer after entering Sleep
mode, the printer automatically turns off.
Choose On for the buzzer to sound once for warnings and
three times for errors.
Adjust the Display Screen contrast level.
Set the current date.
Set the current time. Available only if the Date setting is
specified.
Specify the date format.
Specify the language used on the Display Screen.
Specify the time zone. Time zone options indicate a main
city in this time zone and the difference from Greenwich
Mean Time.
Choose the display unit for length. Change the unit dis-
played for the remaining amount of roll paper, Tot.Print
Area, and so on.
Specify printing behavior if the type and size of paper
specified in the printer menu does not match the type and
size in the printer driver.
Choose Pause to have printing paused under these cir-
cumstances. Choose Warning to continue printing after
notification. Choose None to continue printing without no-
tification.
If sheet size detection is activated, choose whether ISO
A3+ or 13"x19"(Super B) is applied when a sheet of an
intermediate size is detected.
If sheet size detection is activated, choose whether ISO
B1 or 28"x40" (ANSI F) is applied when a sheet of an in-
termediate size is detected.
Choose On to use the paper size setting as the basis for
printing instead of other settings. The margin setting of the
printer menu will be used instead of the margin setting of
the printer driver if the latter is smaller, which may prevent
text or images in the margin from being printed.
Choose Off to give priority to margin settings. The larger
value is used if the margin specified in the printer driver
does not match the margin in the printer menu.
iPF8400SE
User's Guide