Canon iPF8400SE imagePROGRAF User Manual page 344

Changing the Type of Paper
Changing the Type of Paper
• When you load a roll, a menu for selection of the type of paper is shown on the Display Screen. Select the type of
paper, and then press the OK button.
Note
If no barcode has been printed on the roll and you have set ManageRemainRoll to On, specify the roll length after
the type of paper. (See "Specifying the Paper Length.")
1
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to
select the Paper tab (
Note
2
Press the OK button.
The Paper Menu is displayed.
3
Press ▲ or ▼ to select Chg. Paper Type, and then press the OK button.
4
Press ▲ or ▼ to select the type of paper loaded ( Roll Paper or Cut Sheet ), and then press the OK
button.
5
Press ▲ or ▼ to select the type of paper loaded in the printer, and then press the OK button.
Important
Note
Using the Same Type of Paper Regularly
Configure this setting so that current media type settings will be automatically selected when you load the same
type of paper later.
1
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to
select the Paper tab (
Note
344
2
Press the OK button.
The Paper Menu is displayed.
3
Press ▲ or ▼ to select Keep Paper Type, and then press the OK button.
4
Press ▲ or ▼ to select On, and then press the OK button.
).
• If the Tab Selection screen is not displayed, press the Menu button.
• Be sure to select the correct paper type. If this setting does not match the loaded paper, it may cause
feed errors and affect printing quality.
• For details on types of paper, see the Paper Reference Guide. (See "Types of Paper.")
fault, Plain Paper is selected.
• If you move the Release Lever, the setting automatically reverts to the previously selected paper.
).
• If the Tab Selection screen is not displayed, press the Menu button.
P.345
➔
iPF8400SE
By de-
P.326
➔
User's Guide