Insufficient Paper For Job; This Paper Cannot Be Used As Size Is Not Supported; Cannot Print As Selected. Another Roll Is In Use; Roll Printing Is Selected - Canon ImagePrograf iPF840 series Basic Manual

Insufficient paper for job

Insufficient paper for job
Insufficient paper for job
The printer has received a print job longer than the amount of roll paper left when Manag-
eRemainRoll in the Control Panel menu is On.

This paper cannot be used as size is not supported.

This paper cannot be used as size is not supported.
Paper that is too large for the printer has been
loaded.
Paper that is too small for the printer has been
loaded.
Paper has been loaded that is too small to
print the test pattern for printhead adjustment
or nozzle checking.

Cannot print as selected. Another roll is in use.

Cannot print as selected. Another roll is in use.
A printed document remains in the Output Tray without being cut
and a print job was received that specifies the other roll.

Roll printing is selected.

Roll printing is selected.
Cause
You have attempted to print on a roll,
but no roll is loaded.

Roll printing is selected, but sheets are loaded.

Roll printing is selected, but sheets are loaded.
Cause
A print job for rolls was received when a
sheet is loaded.
128
Cause
Cause
Lift the Release Lever and load paper of the correct size.
Lift the Release Lever and load paper of the correct size.
Lift the Release Lever and load unused paper A4/Letter (vertical) or larger. More
than one sheet may be required depending on the adjustment.
Cause
Press ▲ or ▼ to select "Load Roll Paper", and then press the OK button. Load the roll,
and then print.
(See "Attaching the Roll Holder to Rolls.")
(See "Loading Rolls in the Printer.")
Press ▲ or ▼ and select Stop Printing or press the Stop button to stop printing.
Follow these steps to load and print on a roll.
1.
Press ▲ or ▼ to select Eject Cut Sheet, press the OK button, and remove the sheet.
(See "Removing Sheets.")
2.
Load a new roll.
(See "Paper Sizes.")
User's Guide
➔
(See "Paper Sizes.")
User's Guide
➔
Press the OK button to stop printing.
Cut the printed document.
(See "Specifying the Cutting Method for Rolls.")
Load the other roll and resend the print job.
(See "Loading and Printing on Rolls.")
Corrective Action
➔
Corrective Action
P.28
➔
Corrective Action
Press ▲ or ▼ to select Print, and
then press the OK button to resume
printing.
However, the roll paper may run out
during the print job and you may not
be able to print all of the document.
Press ▲ or ▼ to select Change Pa-
per, and then press the OK button to
stop printing.
(See "Removing the Roll from the
Printer.")
P.21
➔
(See "Loading Rolls in the Print-
er.") P.15
➔
Press ▲ or ▼ and select Stop Print-
ing or press the Stop button to stop
printing.
Corrective Action
Corrective Action
User's Guide
➔
P.12
➔
P.15
iPF840 Series
User's Guide
➔
Basic Guide