Insufficient Paper For Job; This Paper Cannot Be Used As Size Is Not Supported - Canon iPF8300S User Manual

Error Message >

Insufficient paper for job

The printer has received a print job longer than the amount of roll paper
left when ManageRemainRoll in the Control Panel menu is On.
13

This paper cannot be used as size is not supported.

Paper that is too large for the printer has been
loaded.
Paper that is too small for the printer has been
1100 loaded.
Paper has been loaded that is too small to print
the test pattern for printhead adjustment or noz-
zle checking.
Insufficient paper for job
Messages regarding paper >
Cause
Cause
Press ▲ or ▼ to select Print, and then
press the OK button to resume printing.
When using the Media Take-up Unit,
press ▲ or ▼ to select Print, and then
press the OK button to resume printing.
However, the roll paper may run out dur-
ing the print job and you may not be able
to print all of the document.
Press ▲ or ▼ to select Change Paper,
and then press the OK button.
Change the Paper Source of the printer
driver, or replace the roll with a roll that
has enough paper for the print job, and
then printt.
When using the Media Take-up Unit,
press ▲ or ▼ to select Stop Printing,
and then press the OK button to stop
printing.
Remove the printed document from the
Media Take-up Unit, replace the roll with
a roll that has enough paper for the print
job, and then try printing again.
(See "Removing the Roll from the
Printer.")
(See "Loading Rolls in the Printer.")
→P.786
(See "Removing Printed Documents
from the Media Take-up Unit (Option-
al).")
Press ▲ or ▼ to select Stop Printing or
press the Stop button to stop printing.
Corrective Action
Lift the Release Lever and load paper of the correct size.
(See "Paper Sizes.")
→P.775
Lift the Release Lever and load paper of the correct size.
(See "Paper Sizes.")
→P.775
Lift the Release Lever and load unused paper A4/Letter (vertical) or
larger. More than one sheet may be required depending on the ad-
justment.
Corrective Action
→P.794
→P.842
iPF8300S