iPF8400SE
6
Press ▲ or ▼ to select On, and then press the OK button.
The display reverts to the NetWare menu.
7
Press ▲ or ▼ to select Frame Type, and then press the OK button.
8
Press ▲ or ▼ to select the frame type to use, and then press the OK button.
The display reverts to the NetWare menu.
9
Press ▲ or ▼ to select Print Service, and then press the OK button.
10
Press ▲ or ▼ to select the desired print service, and then press the OK button.
The display reverts to the NetWare menu.
11
Press the Menu button.
If you have changed any settings, a confirmation mes-
sage is displayed. In this case, press the OK button.
•
Be sure to complete step 11. This will activate the values you have entered.
Important
•
If an error message is displayed, check the settings and correct any invalid values.
Note
•
To cancel this process, press the Back button.
Specifying NetWare Print Services
Specifying NetWare Print Services
Before printing in a NetWare network, you must configure print services such as print servers, print queues, and so
on. You can configure the print service settings from a computer using any of the following Novell software provi-
ded with NetWare.
NWADMIN
•
PCONSOLE
•
•
If you use NWADMIN to configure the print service settings, Novell Client (the Novell NetWare client software)
must be installed as the client software application.
Important
•
NetWare networking is unsupported in Windows Vista, Windows Server 2008 and Windows 7.
This topic gives instructions for configuring NetWare print services. The order of this procedure may vary depend-
ing on the environment.
Choosing the type of print services
Before completing print service settings, choose the type of print service. Refer to the following descriptions as
needed.
•
In NetWare 5.1 or 6.0, NDPS may also be used as the print service. If you use NDPS, use the Novell printer gate-
way included with NetWare. For details on configuring NDPS, refer to the NetWare documentation.
Note
NDS (Novell Directory Service) and bindery
•
NDS and bindery are both supported. Use the mode that is compatible with your network environment.
Queue server mode and remote printer mode
•
Queue server mode and remote printer mode are both supported.
User's Guide
Specifying NetWare Print Services
487
Need help?
Do you have a question about the iPF8400SE imagePROGRAF and is the answer not in the manual?
Questions and answers