Canon iPF8400SE imagePROGRAF User Manual page 368

Using the Output Stacker
• When storing printed documents on the Output Stacker, always use it in position (1). If you do not, printed docu-
ments may not be dropped into the Output Stacker, and the printed surface may become soiled.
Important
• The Output Stacker can hold one sheet. When printing multiple pages, remove each sheet after it is printed.
• The Output Stacker can hold printed documents from roll paper up to 1,189mm (46.81 in.) long.
• Depending on the type of paper, the edge may curl or bend during ejection. In this case, straighten out the paper.
If the paper is curled or bent, it may damage printed documents.
The Output Stacker locks into position if you lift it to position (1) or (2). To lower the Output Stacker, lift the front
Basket Rod lightly to release the lock, and then lower the stacker.
368
iPF8400SE
User's Guide