Canon iPF8400SE imagePROGRAF User Manual page 60

Resizing Originals by Entering a Scaling Value (Mac OS)
9
Access the Page Setup pane.
10
Select and click a roll paper in the
11
Select the paper width of the roll loaded in the printer for
is selected.
12
Make sure the
inal size as selected in
tributes dialog box—in this case, ISO A4.
13
Select the
14
G
Click Scaling and enter 120.
Note
15
Confirm the print settings, and then click
60
Note
A
C
Page Size setting matches the orig-
C
Paper Size in the Page At-
D
Enlarged/Reduced Printing check box.
• You can specify enlargement that exceeds the paper size, but in this case, the portion off the edge of the
paper will not be printed.
• If the original size after enlargement or reduction is smaller than the paper size, the original is printed in
the upper-left corner. In this case, you can center originals by selecting the
• For tips on confirming print settings, see "Confirming Print Settings ."
Paper Source list.
B
Roll Width. In this case, ISO A2/A3 (420.0mm)
M
Print to start printing.
iPF8400SE
J
Print Centered check box.
P.251
➔
User's Guide