Canon iPF8400SE imagePROGRAF User Manual page 525

iPF8400SE
• If the Tab Selection screen is not displayed, press the Menu button.
Note
2
Press the OK button.
The Paper Menu is displayed.
3
Press ▲ or ▼ to select Paper Details, and then press the OK button.
4
Press ▲ or ▼ to select the type of paper, and then press the OK button.
When Head Height is set to Automatic, the setting value selec-
•
ted for the previous print job is displayed (to the right of Auto-
Note
matic ) once you select the type of paper currently supplied.
However, the value is cleared when the printer is turned off or
the paper is replaced.
5
Press ▲ or ▼ to select Head Height, and then press the OK button.
6
Press ▲ or ▼ to select the desired setting value, and then press the OK button.
• Using Automatic will ensure that the printer adjusts the Printhead height to the optimal level before print-
ing, accounting for the ambient temperature and humidity. When a setting other than Automatic is used,
Note
that value will always be applied.
• Depending on the type of paper, some setting values may not be available.
User's Guide
Troubleshooting Paper Abrasion and Blurry Images
525