Canon iPF8400SE imagePROGRAF User Manual page 356

Specifying the Cutting Method for Rolls
9
Press ▲ or ▼ to align the paper leading edge with
the (a) position.
10
Print the job.
The printer stops advancing the paper after printing.
Note
11
Press the Feed button.
Roll paper is fed to the specified cut position and then au-
tomatically stopped.
12
Cut the roll paper manually with scissors or the like.
Important
13
Press the OK button.
After the roll is rewound, it stops automatically.
356
• The printer can continue to receive print jobs from computers. If a print job is received and printed here, it
can be printed without the margin of about 10 cm being created at the paper leading edge.
• Cut at the dotted line printed on the paper. If you cut on the printer side of the dotted line, the paper
leading edge may rub against the printhead and may deviate from the paper retainer.
iPF8400SE
User's Guide