iPF830 Series
This paper cannot be used as size is not supported.
This paper cannot be used as size is not supported.
Cause
Paper that is too large for the printer has been
loaded.
Paper that is too small for the printer has been
loaded.
Paper has been loaded that is too small to
print the test pattern for printhead adjustment
or nozzle checking.
Roll printing is selected.
Roll printing is selected.
Cause
You have attempted to print on a roll,
but no roll is loaded.
Roll printing is selected, but sheets are loaded.
Roll printing is selected, but sheets are loaded.
Cause
A print job for rolls was received when a
sheet is loaded.
Basic Guide
Cause
Lift the Release Lever and load paper of the correct size.
(See "Paper Sizes.")
Lift the Release Lever and load paper of the correct size.
(See "Paper Sizes.")
Lift the Release Lever and load unused paper A4/Letter (vertical) or larger. More
than one sheet may be required depending on the adjustment.
Press ▲ or ▼ to select "Load Roll Paper", and then press the OK button. Load the roll,
and then print.
(See "Attaching the Roll Holder to Rolls.")
(See "Loading Rolls in the Printer.")
Press ▲ or ▼ and select Stop Printing or press the Stop button to stop printing.
Follow these steps to load and print on a roll.
1.
Press ▲ or ▼ to select Eject Cut Sheet, press the OK button, and remove the sheet.
(See "Removing Sheets.")
2.
Load a new roll.
(See "Loading Rolls in the Printer.")
The printer now starts printing the print job.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
This paper cannot be used as size is not supported.
Press ▲ or ▼ to select Change Pa-
per, and then press the OK button to
stop printing.
(See "Removing the Roll from the
Printer.")
(See "Loading Rolls in the Print-
er.")
P.15
➔
Press ▲ or ▼ and select Stop Print-
ing or press the Stop button to stop
printing.
Corrective Action
User's Guide
➔
User's Guide
➔
Corrective Action
P.12
➔
P.15
➔
Corrective Action
P.23
➔
P.15
➔
Corrective Action
P.18
➔
125