Canon iPF8400SE imagePROGRAF User Manual page 387

iPF8400SE
• Depending on the selected standard paper, you might not be able to input the Name in Printer Driver
and add the created custom paper to the printer driver. To use the custom paper in the printer driver,
Note
create it by changing the standard paper to another paper.
• The characters that can be entered for Name in Printer Driver and Name on Control Panel are stated
below.
alphanumeric, space, "-", ".", "_", "(", ")", "+", "%", ",", "/"
For Name in Printer Driver up to 32 one Byte characters can be entered, and for Name on Control
•
Panel up to 16 one Byte characters can be entered.
• Paper Name (English) is used in keeping track of the amount of roll paper left, in status print, etc.
For Paper Name (English) up to 16 one Byte characters can be entered.
6
Load the custom paper in the printer and then click
the OK button.
• Do not load paper that is curled or that has already been printed on.
Important
7
The Step 3: Paper Source Settings dialog box is dis-
played. Select the paper source where the custom paper is
loaded and then click the OK button.
8
The Step 4: Paper feed adjustment dialog box is
displayed. Click the Execute button to execute paper
feed adjustment.
The adjustment pattern is printed, and the paper feed
is automatically adjusted based on the printing result.
Once the paper feed adjustment is complete, click
the Next button.
• Check that there is no paper left on the ejection guide.
• If Paper Feed Adjustment is not executed, horizontal stripes with different color tones may appear in
Important
the printed material. Paper feed adjustment does not need to be executed more than once. Execute pa-
per feed adjustment only once each time you add a custom paper.
9
The Roll Paper Settings dialog box is displayed.
• If a paper source other than Roll Paper is selected in the Step 3: Paper Source Settings dialog box, this
screen is not displayed.
Note
User's Guide
Add Custom Paper
387