Canon iPF8400SE imagePROGRAF User Manual page 535

iPF8400SE
• There may be ink around the ink supply section of ink tanks you removed. Handle ink tanks carefully during re-
placement. The ink may stain clothing.
Important
• Do not install used ink tanks in another model of printer.
This will prevent correct ink level detection, which may damage the printer or cause other problems.
• We recommend using up an Ink Tank in the course of printing within six months after breaking the seal. Printing
quality may be affected if you use older ink tanks.
• Do not leave the printer without ink tanks installed for extended periods (a month or more). Residual ink may
become clogged inside the printer and affect printing quality.
How to replace an Ink Tank
1.
Confirm the message
2.
Access the menu for Access the menu for Ink Tank replacement
er.)
3.
Remove the Ink Tank.
Remove the Ink Tank (330 ml)
•
Remove the Ink Tank (700 ml)
•
4.
Load the new Ink Tank.
Load the Ink Tank (330 ml)
•
Load the Ink Tank (700 ml)
•
Confirm the message
When the ink level becomes low, a message is displayed on the Display Screen.
According to the message, replace the ink tank or prepare a new ink tank. (See "When to Replace Ink
Tanks.")
P.544
➔
If a message requests you to replace an Ink Tank, press the OK button. In this case, you can skip the step Access
the menu for ink tank replacement. Follow the instructions in Remove the ink tanks.
• Do not remove an Ink Tank during initialization immediately after turning on the printer, or during printhead clean-
ing. Ink may leak out.
Important
• Ink Tank replacement is possible even during printing, when print jobs are being canceled, or when paper is being
advanced.
Note
User's Guide
P.535
➔
P.536
➔
P.537
➔
P.539
➔
P.541
➔
(Otherwise, open the Ink Tank Cov-
P.536
➔
Replacing Ink Tanks
535