Messages Regarding Printheads; Cannot Adjust Printhead; Wrong Printhead; Printhead Error - Canon iPF8400SE imagePROGRAF User Manual

Cannot adjust printhead.

Messages regarding printheads

Messages regarding printheads
Cannot adjust printhead. .............................................................................................................................................. 624

Wrong printhead. ............................................................................................................................................................. 624

Printhead error. ................................................................................................................................................................ 624

Cannot recognize print head. ..................................................................................................................................... 624

Execute printhead cleaning. ........................................................................................................................................ 625
Cannot adjust printhead. Cannot adjust printhead.
Cause
The Printhead nozzles are
clogged.
The Printhead cannot be
aligned; highly transparent film
is loaded.
Wrong printhead.
Wrong printhead.
An incompatible Printhead has been installed.
Printhead error. Printhead error.
Cause
There is a problem with the Printhead.
Cannot recognize print head.
Cannot recognize print head.
No Printhead is installed.
624
The Printhead cannot be recognized because it is not installed correctly.
Execute Head Posi. Adj. again, as follows.
1.
Press the OK button to clear the error.
2. Print a test pattern to check the nozzles.
(See "Checking for Nozzle Clogging.")
3.
Clean the Printhead if the nozzles are clogged.
(See "Cleaning the Printhead.")
4. Execute Head Posi. Adj. again.
(See "Automatic Adjustment to Straighten Lines and Colors.")
Press the OK button to clear the error.
We recommend using a type of paper that you often use, other than film, for Printhead adjustment.
(See "Automatic Adjustment to Straighten Lines and Colors.")
Cause
Open the Top Cover and replace the Printhead with a new one.
(See "Replacing the Printhead.")
Follow these steps to replace the Printhead.
1.
Open the Top Cover.
2. Replace it with a new Printhead.
(See "Replacing the Printhead.")
Follow these steps to replace the Printhead.
1. Turn off the printer, wait a while, and then turn it on again.
2. Open the Top Cover.
3. Replace it with a new Printhead.
(See "Replacing the Printhead.")
Cause
Corrective Action
P.545
➔
P.546
➔
Corrective Action
P.547
➔
Corrective Action
P.547
➔
P.547
➔
Corrective Action
Follow these steps to install the Printhead.
1. Open the Top Cover.
2.
Install the Printhead.
(See "Replacing the Printhead.")
Follow these steps to reinstall the Printhead.
1. Open the Top Cover.
iPF8400SE
P.520
➔
P.520
➔
P.547
➔
User's Guide