Resizing Originals To Fit The Roll Width (Mac Os) - Canon iPF8400SE imagePROGRAF User Manual

Resizing Originals to Fit the Roll Width (Mac OS)

9
Select the
Note
10
E
Click Fit Roll Paper Width.
Note
11
Confirm the print settings and print as desired.
Note
Resizing Originals to Fit the Roll Width (Mac OS)
Resizing Originals to Fit the Roll Width (Mac OS)
This topic describes how to enlarge originals before printing to match the roll width, based on the following exam-
ple.
Document: Any Type
•
Page size: A4 (210.0 × 297.0 mm [8.3 × 11.7 in])
•
Paper: Roll paper
•
Paper type: Plain Paper
•
Roll paper width: 16 inches (406.4 mm)
•
1
This sets the
Note
54
C
Enlarged/Reduced Printing check box.
C
• If the Enlarged/Reduced Printing check box is
not displayed on the Page Setup sheet, clear the
B
Borderless Printing check box.
E
• After you click Fit Roll Paper Width, the Information dialog box is displayed. Select the width of the
loaded roll in the Roll Paper Width list and click OK.
• Make sure the roll paper width you specify matches the width of the loaded roll.
For tips on confirming print settings, see "Confirming Print Settings ."
•
B C
Format for and Paper Size.
The configuration method varies depending on the
•
OS and application software you are using.
If Page Setup is displayed in the application menu,
the settings are configured by opening the Page At-
tributes dialog box from Page Setup.
If it is not displayed, the settings are configured in the
upper part of the printer driver displayed when you se-
lect Print from the application software menu.
iPF8400SE
P.141
➔
User's Guide