Specifying The Cutting Method For Rolls - Canon iPF8400SE imagePROGRAF User Manual

iPF8400SE
2
Select the Main pane and click
dia Type.
3
In the Paper Detailed Settings dialog box displayed
next, select the desired settings values in
tween Pages and
Time, and then click OK.
(See "Paper Detailed Settings Dialog Box (Mac
OS).")
P.257
➔

Specifying the Cutting Method for Rolls

Specifying the Cutting Method for Rolls

How rolls are cut after ejection varies depending on printer settings.
Cutting Method
Automatic The roll is automatically cut by the Cutter Unit fol-
lowing printer driver settings.
Select this to move the cutter by key operation and
Eject (when
the paper cut paper. Although there are cases with Automat-
surface is ic in which the paper falls and the paper surface is
being scratched when the paper rubs the Output Stacker,
you can avoid damaging the paper with this method
scratched /
since you can cut by holding the paper with your
to wait for
hand so that the paper does not fall when cutting,
ink to dry)
Also, since you can cut while visually confirming the
drying of the ink, you can avoid ejecting paper be-
fore the ink has dried.
User's Guide
C
Settings in
C
Be-
D B
Between Scans in Drying
A
Me-
Printer Setting
Media Automatic
Menu >
Paper De-
Eject
tails >
(Various
Types of
Paper) >
Cutting
Mode
Specifying the Cutting Method for Rolls
Driver Setting
Auto Cut Yes
(See "Cut-
ting Roll
Yes
Paper After
Print-
ing.")
P.133
➔
351