Canon iPF8400SE imagePROGRAF User Manual page 548

Replacing the Printhead
1
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to
select the Settings/Adj. tab (
Note
2
Press the OK button.
The Set./Adj. Menu is displayed.
3
Press ▲ or ▼ to select Maintenance, and then press the OK button.
4
Press ▲ or ▼ to select Replace P.head, and then press the OK button.
Ink begins being drawn in. When it finishes, instructions are displayed on the Display Screen.
It takes about three minutes to complete.
Replace the Printhead
1
Open the Top Cover.
2
If the Carriage Cover is dirty, use a damp cloth that
you have wrung out completely to wipe it clean.
548
).
• If the Tab Selection screen is not displayed, press the Menu button.
iPF8400SE
User's Guide