Print Area - Canon iPF8400SE imagePROGRAF User Manual

iPF8400SE
Interface
Hi-Speed USB
Ethernet
Ink
For information on the ink the printer supports, see "Ink Tanks."
Paper
For information on the types of paper the printer supports, refer to the Paper Reference Guide. (See "Displaying
the Paper Reference Guide.")
Paper width
Minimum paper length
Maximum printable length ( *1 )
Thickness
Roll maximum outer diameter
Supported paper core inner diameter

Print area

*1: Varies depending on the operating system or application.
Print Area
Print Area
A margin required by the printer is added with respect to the size of paper loaded in the printer. Except in border-
less printing, the actual printing area corresponds to the paper size minus the space for this margin.
• Printable Area: The area that can be printed.
• There is no margin (that is, a margin of 0 mm) during borderless printing on rolls.
Note
• Recommended Print Area: We recommend printing within this area.
To print so that your original matches the print area exactly, use an oversized paper size that includes the required
•
margin. (See "Printing on Oversize Paper.")
Top Edge
Sheets 5 mm (0.20 in)
Rolls 0/5 mm (0/0.20 in)
User's Guide
Format
Mode
Connector
Format
Specification
Protocols
P.330
➔
For information on the paper widths the printer supports, see "Paper Sizes."
Rolls
Sheets
Rolls
Sheets
For details, see "Print Area."
➔
Margins of Printable Area
Bottom Edge
23 mm (0.91 in) 5 mm (0.20 in)
0/5 mm (0/0.20 in) 0/5 mm (0/0.20 in)
Internal port
Full-speed (12 Mbps), high-speed (480 Mbps), bulk transfer
Series B (4-pin)
Internal port
IEEE 802.3 10Base-T,
IEEE 802.3u 100Base-TX/Auto-Negotiation,
IEEE 802.3x Full Duplex
IPX/SPX (Netware 4.2, 5.1, 6.0), SNMP (Canon-MIB compati-
ble), HTTP, TCP/IP (IPv4/IPv6), AppleTalk
P.534
➔
203.2 mm (8.0 in)
18 m (19.7 yd)
1,600 mm (63.0 in)
0.07–0.8 mm (0.0028–0.031 in)
0.07–0.8 mm (0.0028–0.031 in)
150 mm (6 in) or shorter
2 inches / 3 inches
P.631
➔
P.61
Margins of Recommended Print Area
Sides Top Edge
20 mm (0.79 in)
20 mm (0.79 in)
P.326
➔
Bottom Edge Sides
23 mm (0.91 in) 5 mm (0.20 in)
5 mm (0.20 in) 5 mm (0.20 in)
Print Area
631