Prepare For Parts Replacement; Parts Replacement Time Has Passed; Unknown File; Multi-Sensor Error - Canon iPF8400SE imagePROGRAF User Manual

Prepare for parts replacement.

Prepare for parts replacement.
Prepare for parts replacement.
It is almost time to replace consumables for
which service is required.

Parts replacement time has passed.

Parts replacement time has passed.
It is past the recommended time to replace consumables for which service is required.

Unknown file.

Unknown file.
Data sent to keep the printer up to date (such as pa-
per information) is in the wrong format.
You have uploaded firmware for a different model.

Multi-sensor error

Multi-sensor error
Direct sunlight or strong lighting may be shin-
ing on the printer and causing the sensor to
malfunction.
The performance of a sensor inside the print-
er may be impaired.
628
Cause
If "Parts replacement time has passed." is displayed, you can continue to use the
printer for some time.
Contact your Canon dealer for assistance.
Cause
Cause
Cause
Take steps to ensure the printer is not used when exposed to direct sunlight or
strong lighting.
Turn off the printer and wait at least three seconds before restoring the power.
Turn off the printer and wait at least three seconds before restoring the power.
If the message is displayed again, contact your Canon dealer for assistance.
Corrective Action
Corrective Action
Check the data. Turn off the printer and wait a while before restoring power,
and then resend the data.
Check the firmware version. Turn off the printer and wait a while before re-
storing power, and then resend the firmware.
If the message is displayed again, contact your Canon dealer for assistance.
Corrective Action
Corrective Action
Contact your Canon dealer for assistance.
iPF8400SE
User's Guide