Mac Os Settings; Configuring The Destination In Tcp/Ip Networks; Configuring The Destination For Bonjour Network; Configuring The Destination For Appletalk Networks - Canon iPF8400SE imagePROGRAF User Manual

Configuring the Destination in TCP/IP Networks

Mac OS Settings

Mac OS Settings
Configuring the Destination in TCP/IP Networks ............................................................................................. 492

Configuring the Destination for Bonjour Network ........................................................................................... 492

Configuring the Destination for AppleTalk Networks .................................................................................... 492

Configuring the Printer's AppleTalk Network Settings ................................................................................... 494
Configuring the Destination in TCP/IP Networks
Configuring the Destination in TCP/IP Networks
If you use the printer in a TCP/IP network, register the printer in Print & Scan (or Print & Fax) in the Mac OS
System Preferences.
• For details on how to register a printer using a TCP/IP network, see the OS User Manual.
Note
• If you use the printer in a TCP/IP network, make sure the printer's IP address is configured correctly. (See
"Configuring the IP Address Using the Printer Control Panel.")
Important
Configuring the Destination for Bonjour Network
Configuring the Destination for Bonjour Network
If you use the printer in a network that uses the Bonjour function, register the printer in Print & Scan (or Print &
Fax) in the Mac OS System Preferences.
• For details on how to register a printer using Bonjour, see the OS User Manual.
Note
• Bonjour and IP Print (Auto) do not support printing to a printer on other network groups that require a router for
connection. Make sure the computer and printer are on the same network. For information about network set-
Important
tings, ask your network administrator.
• By default, Bonjour is activated on the printer. You can activate or deactivate the Bonjour function or change the
printer name by using RemoteUI. For instructions on changing it, see "Using RemoteUI."
Configuring the Destination for AppleTalk Networks
Configuring the Destination for AppleTalk Networks
To print over an AppleTalk network, activate the AppleTalk protocol and configure the destination as follows.
Activating AppleTalk on the printer
• By default, the AppleTalk protocol is disabled on the printer.
Important
1
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to
select the Settings/Adj. tab (
492
Note
2
Press the OK button.
The Set./Adj. Menu is displayed.
3
Press ▲ or ▼ to select Interface Setup, and then press the OK button.
).
• If the Tab Selection screen is not displayed, press the Menu button.
P.477
➔
➔
iPF8400SE
P.475
User's Guide