Set./Adj. Menu - Canon iPF8400SE imagePROGRAF User Manual

iPF8400SE
Print Job Log
Pause Print
*1: A rough estimate of the amount of ink consumed per print job is displayed. Actual ink consumption may be different. The
average margin of error for estimates calculated according to Canon measurement conditions for ink costs is ±15%. Canon
does not guarantee the accuracy of these estimates. Estimates may vary depending on conditions of use. Calculation of
these estimates does not include ink consumed when cleaning printheads by forceful ejection of ink.

Set./Adj. Menu

Limited items are displayed during printing. The displayed items are indicated by annotations.
Test Nozzle Check
Print
Status Print
Interface Print
Paper Details
Print Job Log
Menu Map
Adjust Head Standard
Printer Posi.
Adj.
Simple
Other
User's Guide
Setting Item
Setting Item
Initial adjustmt
Manual
Print a record of print jobs, in-
cluding the paper type and
size, amount of ink con-
sumed, and so on. Ink con-
sumption indicates a rough
estimate of the amount of ink
consumed per print job.( *1 )
Choose On to stop printing.
Description, Instructions
Print a test pattern to check the nozzles.
Print information about the setting values and condition of
the printer.
Print interface settings information.
Print the paper settings as specified in Paper Details.
Print a record of print jobs, including the paper type and
size, amount of ink consumed, and so on. Ink consump-
tion indicates a rough estimate of the amount of ink con-
sumed per print job.( *1 )
Print the menu structure.
An adjustment pattern is printed and the print position is
automatically adjusted to fix misaligned printing. Select
Standard if vertical lines in printed material are warped or
colors are out of alignment. Select Standard also if the
printing results are not improved by executing Simple.
(See "Automatic Adjustment to Straighten Lines and Col-
ors.")
P.520
➔
An adjustment pattern is printed and the print position is
automatically adjusted to fix misaligned printing. Simple
executes a simple adjustment in a short time. Select Sim-
ple when frequently adjusting the printhead, such as dur-
ing daily maintenance. (See "Automatic Adjustment to
Straighten Lines and Colors.")
Printhead position adjustment is executed during the initial
setup. If adjusting the printhead position has not been per-
formed such as due to an error during initial setup or the
state of the operating settings when replacing the print-
head, select Initial adjustmt. (See "Adjustment When In-
stalling the Printhead.")
P.523
➔
Input the setting values from the adjustment pattern print-
ing results and adjust the printing position to fix mis-
aligned printing. Normally, select Standard. However,
when printing on special paper, or if printing is not im-
proved after Standard, try Manual. (See "Manual Adjust-
ment to Straighten Lines and Colors.")
Menu Settings
Description, Instructions
P.520
➔
P.522
➔
449