Canon iPF8400SE imagePROGRAF User Manual page 79

iPF8400SE
9
Select the print target in the
• When you are using paper that takes longer for ink to adhere for borderless printing and the Cutter Unit
touches printing surfaces that are not dry yet, it may damage the paper or the edge of the document that
Important
is cut, depending on frequency of use. In this kind of situation, change the ink drying time in Between
Pages in the Paper Detailed Settings dialog box.
10
Access the Page Setup pane.
11
Select and click a roll paper in the
12
Select the paper width of the roll loaded in the printer for
selected.
13
C
Make sure the
inal size as selected in
tributes dialog box—in this case, ISO A4.
14
D
Select the Enlarged/Reduced Printing check box.
15
H
Select the Borderless Printing check box.
This ensures that
16
Confirm the print settings, and then click
• For tips on confirming print settings, see "Confirming Print Settings ."
Note
User's Guide
E
Print Target list.
A
Paper Source list.
Page Size setting matches the orig-
C
Paper Size in the Page At-
F
Fit Roll Paper Width is automatically selected in
M
Borderless Printing by Resizing Originals to Fit the Roll Width (Mac OS)
B
Roll Width. In this case, 10 in. (254.0mm) is
Print to start printing.
D
Enlarged/Reduced Printing.
P.251
➔
79