Canon iPF8400SE imagePROGRAF User Manual page 352

Specifying the Cutting Method for Rolls
Eject (when To cut the roll with the Cutter Unit, press the Cut
the paper button.
surface is
being
scratched /
to wait for
ink to dry)
Select this for paper that cannot be cut with the
Manual
Cutter Unit and for paper of which the leading edge
(when us-
ing media curls strongly and rubs the printhead.
that cannot Use scissors to cut each document from the roll af-
be cut with ter printing. For continuous printing (if you will cut
each page later), select Auto Cut > Yes or select
the Cutter
Print Cut Guideline.
Unit )
Paper cut- Choose this option if you want to cut pages by
ting (to pressing Cutter Unit buttons for manual cutting after
printing when Auto Cut > No is selected or Print
have the
Cut Guideline is selected in the printer driver.
roll cut at
your speci- Otherwise choose this option if you want to cut the
fied posi- roll edge after loading a roll.
tion)
• Automatic and Eject are valid only when you have selected Auto Cut > Yes in the printer driver.
Note • With Eject, printing does not resume after a series of jobs have been printed continuously until the roll is cut.
• Eject is the preset selection in Cutting Mode for some types of paper. For this paper, we recommend keeping the
preset cutting mode.
• If documents printed using Automatic, Eject, or manual cutting are short, rolls are advanced a specific amount be-
fore cutting to prevent problems with cutting and paper ejection. This may create a wider bottom margin, in some
cases.
Cut rolls manually in the following cases:
Eject (when the paper surface is being scratched / to wait for ink to dry)
• When cutting wide printed documents after ejection, have two people support the documents. If the paper drops,
printed documents may be damaged.
Important
• Do not lift the paper when holding printed documents before cutting. If the paper rises, it may affect the printing
352
quality or cause rough cut edges.
• Once the following step has been performed, the procedure can be started from step 7 the next time.
Note
• Printing the second and subsequent times
• Printing after replacing with the same type of paper
Cutting Method Printer Setting
Media Eject Auto Cut
Menu > (See "Cut-
Paper De- ting Roll
tails >
Paper After
(Various
Print-
Types of
ing.")
Paper) >
➔
Cutting
Manual
Mode
Cut button Yes
pressed
iPF8400SE
Driver Setting
Yes
P.133
No, Yes, Print
Cut Guideline
No, Print Cut
Guideline
User's Guide