Printing Does Not Start; The Data Lamp On The Control Panel Does Not Light Up; The Printer Does Not Respond Even If Print Jobs Are Sent; Ink Filling.. Is Displayed - Canon iPF8400SE imagePROGRAF User Manual

iPF8400SE

Printing does not start

Printing does not start

The Data lamp on the Control Panel does not light up .................................................................................. 589

The printer does not respond even if print jobs are sent ............................................................................. 589

Ink Filling.. is displayed .................................................................................................................................................. 589

The display screen indicates Agitating... ............................................................................................................... 589

The Data lamp on the Control Panel does not light up
The Data lamp on the Control Panel does not light up
Cause
The printer is not Make sure the power cord is securely plugged in, all the way. Press the Power button to turn on the printer.
on.
The target printer
•
was not selected
when printing.
•
The print job is
•
paused.
•
The printer does not respond even if print jobs are sent
The printer does not respond even if print jobs are sent
Cause
In the Control Panel menu, Pause Print is On.
Ink Filling.. is displayed
Ink Filling.. is displayed
Cause
The printer was forced off during operation.
The display screen indicates Agitating...
The display screen indicates Agitating...
Cause
Ink agitation is in pro-
gress.
User's Guide
In Windows, select the printer by clicking Select Printer or Printer in the printing dialog box and try print-
ing again.
In Mac OS, open the dialog box of the printer driver, select the printer from the list of Printer, and try
printing again.
In Windows, restart the print job as follows.
1. Select the printer icon in the Printers and Faxes (or Printers ) window.
2. Clear Pause Printing in the File menu to restart the print job.
In Mac OS, restart the print job as follows.
1.
Click Print & Scan (or Print & Fax).
2.
Select the printer, and then Resume Printer (or Resume ) in the Printers menu to restart the print
job.
Set Pause Print to Off.
(See "Pausing Printing.")
Wait until the system has been filled with ink.
Please wait until ink agitation is finished.
The time for agitation varies depending on how long the printer was off. (Between about a minute and a
half to twenty minutes.)
The Data lamp on the Control Panel does not light up
Corrective Action
Corrective Action
P.27
➔
Corrective Action
Corrective Action
589