Canon iPF8400SE imagePROGRAF User Manual page 389

iPF8400SE
10
The Step 5: Configure the amount of ink used dia-
log box is displayed.
The upper limit on the amount of ink used to print to
the custom paper is set on this screen by selecting
from among several levels.
First, click the Test Print button to perform a test
print of each level.
• If a standard paper that does not display the Name in Printer Driver is selected in the screen in Step 5,
you cannot perform test prints or configure the maximum amount of ink to use.
Note
11
The Test Print Settings dialog box is displayed.
Select the print priority and print quality of the test
print using Print Priority and Print Quality.
Set the level to test print using Maximum ink usage
and the image to use using Image used in test
print, and then click the Start Print button.
12
Determine and set the ink level that is thought to give the
best visual test print results with no bleeding or scraping of
ink.
User's Guide
Add Custom Paper
389