Insufficient Paper For Job; This Paper Cannot Be Used As Size Is Not Supported - Canon iPF8400 Basic Manual

iPF8400
Because the Platen is soiled with ink or other substances, the size of the clear film
cannot be detected.

Insufficient paper for job

Insufficient paper for job
The printer has received a print job longer than the amount of roll paper left when Man-
ageRemainRoll in the Control Panel menu is On.

This paper cannot be used as size is not supported.

This paper cannot be used as size is not supported.
Cause
Paper that is too large for the printer has been loa-
ded.
Basic Guide
Cause
Cause
Lift the Release Lever and load paper of the correct size.
(See "Paper Sizes.")
Corrective Action
If this error recurs after you reload the roll,
remove the Roll Holder from the printer,
push the roll firmly in until it touches the Roll
Holder flange, and reload the Roll Holder in
the printer.
(See "Attaching the Roll Holder to Rolls.")
→
P.9
Open the Top Cover and clean the entire
Platen.
(See "Cleaning Inside the Top Cover.")
→
P.53
Corrective Action
Press ▲ or ▼ to select Print, and then press
the OK button to resume printing.
When using the Media Take-up Unit, press ▲
or ▼ to select Print, and then press the OK
button to resume printing.
However, the roll paper may run out during
the print job and you may not be able to print
all of the document.
Press ▲ or ▼ to select Change Paper, and
then press the OK button.
Change the Paper Source of the printer driv-
er, or replace the roll with a roll that has
enough paper for the print job, and then printt.
When using the Media Take-up Unit, press ▲
or ▼ to select Stop Printing, and then press
the OK button to stop printing.
Remove the printed document from the Media
Take-up Unit, replace the roll with a roll that
has enough paper for the print job, and then
try printing again.
(See "Removing the Roll from the Printer.")
→
P.15
(See "Loading Rolls in the Printer.")
(See "Removing Printed Documents from the
Media Take-up Unit (Optional).")
→
User's Guide
Press ▲ or ▼ to select Stop Printing or
press the Stop button to stop printing.
Corrective Action
→
User's Guide
Insufficient paper for job
→
P.11
135