Roll Paper Cannot Be Inserted Into The Paper Feed Slot - Canon iPF8400SE imagePROGRAF User Manual

Roll paper cannot be inserted into the paper feed slot

6
If the paper is not visible, lift the Ejection Guide, re-
move the Roll Holder, and clear the paper jam from
below.
After removing the paper, make sure there are no
other scraps of paper in the printer, and then lower
the Ejection Guide.
7
If the Carriage is on the left, move the Carriage to the
right until it stops.
Important
8
Lower the Release Lever and close the Top Cover.
9
Turn the printer on. (See "Turning the Printer On and Off.")
586
Roll paper cannot be inserted into the paper feed slot
Roll paper cannot be inserted into the paper feed slot
Cause
The roll paper is warped.
Paper is jammed by the paper feed slot.
• Always move the Carriage to the right side. If the Carriage is on the left, a Carriage error may occur
when you turn on the printer.
Straighten out curls and reload the roll.
Remove the jammed paper.
(See "Clearing Jammed Roll Paper.")
(See "Clearing a Jammed Sheet.")
P.17
➔
Corrective Action
P.581
➔
P.584
➔
iPF8400SE
User's Guide