Printing At Full Size (Mac Os) - Canon iPF8400SE imagePROGRAF User Manual

iPF8400SE
7
In the Paper Size Options dialog box, select the Oversize check box in Display Series.
8
Click OK to close the Paper Size Options dialog box.
9
Click Oversize - ISO A4 in the
10
Select and click a roll paper in the
11
Select the width of the loaded roll in the
(420.0mm).
12
Confirm the print settings and print as desired.
• For tips on confirming print settings, see "Confirming Print Settings ."
Note

Printing at Full Size (Mac OS)

Printing at Full Size (Mac OS)
This topic describes how to print at full size based on the following example. (Oversized Printing)
Document: Any Type
•
Page size: A4 (210.0 × 297.0 mm [8.3 × 11.7 in])
•
Paper: Roll paper
•
Paper type: Plain Paper
•
Roll paper width: A2/A3 roll (420.0 mm [16.5 in])
•
1
B
This sets the Format for and
The configuration method varies depending on the
•
OS and application software you are using.
Note
If Page Setup is displayed in the application menu,
the settings are configured by opening the Page At-
tributes dialog box from Page Setup.
If it is not displayed, the settings are configured in the
upper part of the printer driver displayed when you se-
lect Print from the application software menu.
2
Select the printer in the
3
F
In Paper Size, click the size of the original. In this case, click ISO A4 - Oversize.
4
If you configured the settings using the Page Attributes dialog box, click
then select Print from the application software menu.
User's Guide
A
Page Size list.
L
Paper Source list.
M
Roll Paper Width list—in this case, ISO A2/A3 Roll
C
Paper Size.
A
Printer list.
Printing at Full Size (Mac OS)
P.141
➔
F
OK to close the dialog box, and
63