Cannot Print Over Appletalk Or Bonjour Networks - Canon iPF8400SE imagePROGRAF User Manual

Cannot print over AppleTalk or Bonjour networks

Cause
The NetWare server and serv-
ices are not configured correct-
ly.
The printer was turned off and
on when not disconnected from
the server.
Cannot print over AppleTalk or Bonjour networks
Cannot print over AppleTalk or Bonjour networks
Cause
The AppleTalk protocol is not en-
abled on the printer.
The computer you are trying to
print from is not configured cor-
rectly.
The computer and printer are not
on the same network.
602
4. If data transmission to a printer on another subnet fails, deactivate NCP burst mode in that
printer's network protocol settings.
5.
If the printer is used in queue server mode, specify Other/Unknown as the printer type.
Leave the printer off for at least 30 seconds, and then restore power.
Activate AppleTalk on the printer.
(See "Configuring the Printer's AppleTalk Network Settings.")
Make sure the computer's AppleTalk settings are configured correctly.
(See "Configuring the Destination for AppleTalk Networks (Mac OS).")
(See "Configuring the Destination for Bonjour Network (Mac OS).")
Due to the nature of Bonjour, you cannot print if the printer is on another network behind a rout-
er. Make sure the computer and printer are on the same network. For information about network
settings, ask your network administrator.
Corrective Action
Corrective Action
P.494
➔
P.492
➔
iPF8400SE
P.492
➔
User's Guide