Problems Regarding Paper; Clearing Jammed Roll Paper - Canon iPF8400SE imagePROGRAF User Manual

iPF8400SE

Problems Regarding Paper

Problems Regarding Paper

Clearing Jammed Roll Paper ....................................................................................................................................... 581

Clearing a Jammed Sheet ............................................................................................................................................ 584
Roll paper cannot be inserted into the paper feed slot ................................................................................. 586
Cannot load sheets ......................................................................................................................................................... 587
Paper is not cut straight ............................................................................................................................................... 587
Paper is not cut ................................................................................................................................................................ 587
The size of clear film cannot be detected ............................................................................................................ 587
Margins are wide ............................................................................................................................................................. 587
When printing on thin roll paper, the printed surface becomes scratched ........................................... 588

Clearing Jammed Roll Paper

Clearing Jammed Roll Paper
If roll paper jams, follow the steps below to remove jams.
1
Turn the printer off. (See "Turning the Printer On and Off.")
2
Open the Top Cover.
• If the leading edge of the roll jams in the carriage such as when the paper curls strongly, you may be able
to avoid paper jamming by setting the roll cutting method to Manual and setting the detection of paper
Note
leading edge to Do not perform.
(See "Specifying the Cutting Method for Rolls.")
3
If the Carriage is out, move the Carriage out of the
way, away from the paper.
• If you push the Carriage to the left edge, the blade of the Cutter Unit will be lowered in preparation to cut
the paper. Be careful not to pinch your fingers between the Carriage and Platen if you have pushed the
Caution
Carriage to the left edge or if a paper jam occurs during cutting.
User's Guide
P.17
➔
P.351
➔
Clearing Jammed Roll Paper
581