Canon iPF8400SE imagePROGRAF User Manual page 576

Reinstalling the Printer
3
Connect the power cord to the Power Supply Connector
on the back of the printer.
4
Plug the power cord into the outlet.
5
Press the power button to turn the printer on.
6
Open the Ink Tank Cover and install the ink tanks.
7
Install the software.
Note that the driver installation procedure varies depend-
ing on the type of connection.
Important
576
• When the printer is connected to a network (via TCP/IP), the printer's IP address may be changed if you
reinstall the printer.
In this case, be sure to reconfigure the printer's IP address.
iPF8400SE
User's Guide