Engine/Transmission - Arctic Cat WILDCAT/X Service Manual

Engine/Transmission

This section has been organized into sub-sections which
show a progression for the complete servicing of the Arc-
tic Cat Wildcat engine/transmission.
To service the center crankcase halves, the engine/trans-
mission must be removed from the frame. To service top-
side, left-side, and right-side components, the engine/
transmission does not have to be removed from the frame.
 NOTE: Arctic Cat recommends the use of new gas-
kets, lock nuts, and seals and lubricating all internal
components when servicing the engine/transmission.
 NOTE: A new ROV and an overhauled ROV engine
require a "break-in" period. The first 10 hours (or 200
miles) are most critical to the life of this ROV. Proper
operation during this break-in period will help assure
maximum life and performance from the ROV. Instruct
the customer to follow the proper break-in procedure
as described in the Operators Manual.
34
SPECIAL TOOLS
A number of special tools must be available to the techni-
cian when performing service procedures in this section.
Refer to the current Special Tools Catalog for the appropri-
ate tool description.
Description
Seal Protector Tool
Crankcase Separator/Crankshaft Remover
Magneto Rotor Remover Set
Piston Pin Puller
Secondary Drive Gear Holder
Spanner Wrench
Surface Plate
V Blocks
Drive Clutch Spider Removal Kit
 NOTE: Special tools are available from the Arctic
Cat Service Department.
p/n
0444-252
0444-152
0444-254
0644-328
0444-253
0444-240
0644-016
0644-535
0444-281