5. Use a small pick to remove Loctite residue from the
threads on reusable components. Use a small pick to
remove the O-ring from the body cap.
6. Prep the body with Loctite Primer #7649 and set aside
for assembling (curing time is required on primed sur-
faces).
166
Disassembling Shaft Assembly
1. With the eyelet secured in vise, remove the lock nut
from the end of the shaft with a 3/4" wrench. Remove
the rebound valves.
FX158
FX157
2. Cable tie the rebound valves together.
FX156
3. Remove the compression valve stack and cable tie
together.
FX155
FX154
FX153
FX152