7. Clean any Loctite residue off the shaft and out of the
eyelet.
8. Prep the shaft eyelet threads with Loctite Primer
#7649. Wipe any excess primer off the shaft and set it
aside.
168
Assembling
1. Apply green Loctite #638 to threads two threads up.
Tighten the eyelet to 50 ft-lb.
FX141
FX140
2. Insert the spiral retaining ring. Press the bearing into
the eyelet.
FX139
FX138
3. Install the second spiral retaining ring.
FX137
FX136
FX135
FX134