Arctic Cat WILDCAT/X Service Manual page 173

Assembling Shock Absorber
1. Apply green Loctite #638 to body threads two threads
up, 360° around. Install a new O-ring body cap.
2. Insert the bushing into the body and clamp the body in
the vise. Tighten the body to 100 ft-lb.
FX115
FX114
3. Tighten the LSC to 14 ft-lb or the DSC to 35 ft-lb.
FX113
4. Apply blue Loctite #242 to the set screw and install
the LSC knob.
FX112
FX111
FX110
FX109
FX108
171