Arctic Cat WILDCAT/X Service Manual page 167

RESERVOIR - LCS REPLACEMENT
1. Remove the reservoir with a spanner or strap wrench.
Remove the LSC adjuster knob with a #10 torx-head
bit.
2. Use a 5/8" socket to remove the LCS or a deep 5/8"
socket to remove the DSC.
FX166
3. Inspect and clean the LSC/DSC blowout control with
the air nozzle and replace its O-rings.
FX165
4. Heat the body cap to loosen the Loctite. Prior to
removing the body from the body cap, insert a bushing
or used bearing assembly into the body to help prevent
FX164
warpage during removal.
FX163
FX162
FX160
FX161
FX159
165