3. Remove the E-clips securing the cam rollers to the
spider; then remove the thrust washer and roller.
NOTE: The relief in the roller is directed towards the
spider.
4. Remove the spring and movable sheave.
5. Using a suitable punch, remove the roller pin securing
the roller axle in movable sheave; then drive out the
axle and account for a thrust washer.
WC636
WC635
Assembling
1. Install the roller and thrust washer in place with the
washer toward the outside of sheave.
WC628
2. Slide the roller pin into place; then using suitable
punch, insert the pin spring until flush.
WC627
WC626
WC673A
WC682
75