Arctic Cat WILDCAT/X Service Manual page 45

12. Remove the radiator mounting screws; then discon-
nect the coolant hoses from the engine and remove the
radiator from the vehicle being careful not to release
the clamps. Coolant can remain in the radiator.
13. Remove the CVT cooling outlet duct; then remove the
screws securing the air filter mounting bracket to the
CVT housing.
WC192
14. Loosen the inlet boot (A); then remove the crankcase
breather hose (B) and the inlet air duct (C).
WC193
15. Remove the air filter housing strap; then free the air filter
housing from the inlet boot and remove from the vehicle.
WC197A
16. Disconnect the gas line connectors from the fuel rails and
electrical connectors from the injectors; then remove the
mounting screws and remove the fuel rails and injectors.
WC200A
WC201A
WC146A
WC365A
WC203A
43