Arctic Cat WILDCAT/X Service Manual page 175

9. Depress the IFP into the reservoir until it touches bot-
tom.
10. Add oil to the body until its level is about 1 1/2" from
the top of the body. Pass the torch quickly over the
body to eliminate any air bubbles. Insert the shaft
assembly into the body.
FX099
FX098
11. Work the shaft assembly up and down holding pres-
sure against the IFP. Insert the bearing assembly par-
tially into the body; then rap the eyelet with a rubber
mallet several times to eliminate air trapped in the pis-
ton assembly.
FX097
FX096
FX095
FX094
FX093
FX092
173