Arctic Cat WILDCAT/X Service Manual page 134

6. Place the differential with the open side down; then
lift the housing off the spider assembly. Account for
shim(s) and mark as right-side.
Disassembling Pinion Gear
1. Remove the internal snap ring securing the pinion
bearing in the housing.
132
KX177
2. Using the Pinion Gear/Shaft Removal Tool and a ham-
mer, remove the pinion gear from the gear case hous-
ing.
KX178
3. Secure the pinion gear in a bearing puller; then
remove the pinion bearing using a press. Account for a
collar and a bearing.
KX179
4. Remove any reusable parts from the gear case hous-
ing; then discard the housing and lock collar.
Assembling Pinion Gear
1. Install the bearing onto the pinion shaft. Install the
pinion shaft collar.
KX181
WC430
CC878
CC879