Arctic Cat WILDCAT/X Service Manual page 89

4. Remove the snap ring securing the reverse driven gear
and washer; then remove the washer and gear.
5. Remove the reverse driven washer; then remove the
low driven gear locking washer.
GZ313A
6. Remove the low driven gear. Account for a bearing,
bushing, and thrust washer.
GZ314
Assembling
1. From the drive gear end, install a thrust washer, bush-
ing, and bearing; then install the low driven gear and
washer.
GZ320
GZ319
GZ318A
GZ316
GZ317A
GZ318
87