Doors - Arctic Cat WILDCAT/X Service Manual

2. To install a front seat, slide the front of the seat into
the seat retainers and push down firmly on the rear of
seat. The seat should automatically lock into position.
3. To remove a rear seat, remove two flange nuts secur-
ing the seat support to the floor; then remove the seat.
4. To install a rear seat, place into position with the seat
support engaging the floor bolts; then install the
flange nuts and tighten securely.

Doors

CHECKING/ADJUSTING
(Wildcat/X)
The doors and latches are adjustable for proper latching/
unlatching.
1. To raise or lower door-to-latch contact or to move the
door forward or aft, loosen the screws on the hinge-
plate. After adjustment, tighten securely.
2. To move latch forward or aft, loosen the screws on the
latch plate. After adjustment, tighten securely.
WC722A
CHECKING/ADJUSTING
(Wildcat 4/4X)
To adjust the door latch anchors, loosen the two screws
and adjust the latch anchor for proper contact. When
latches are properly aligned, tighten securely.
WC134A
WC109A
WC133A
WC133B
31